Publicité
Les langues disponibles
Les langues disponibles
1. On/off switch
2. Pivot lock button
3. Charging indicator
4. Nozzle
5. Bowl release button
6. Crevice tool
7. Brush tool
8. Dust bowl door
9. Dust bowl door release
10. Removable dust bowl
11. Charging base
ASSEMBLY
ADJUSTING THE NOZZLE
(FIG. A - C)
The nozzle (4) has a brush (7) that can be folded
forward for dusting and upholstery cleaning.
• The nozzle (4) is stored under the appliance.
• Press the pivot lock button (2) and rotate the nozzle
(4) to the required position.
• Release the pivot lock button (2) to lock the nozzle
in position
• The nozzle can be extended by pulling the crevice
tool (6) until it locks into position.
• The crevice tool can be retracted by pressing the
raised button on the crevice tool and pushing the
crevice tool back into the nozzle.
• The nozzle should be returned to the storage
position under the appliance after use and while
charging the appliance.
USE
• Before first use, the battery must be charged for at
least 4 hours.
• Plug the appliance into the charger whenever
power gets low.
CHARGING THE BATTERY (FIG. D)
WARNING:
temperatures between 50°F (10°C) and 104°F (40°C).
The charger supplied with this product is intended to
be plugged in such that it is correctly oriented in a
vertical or floor mount position.
TO CHARGE THE APPLIANCE:
• Make sure the appliance is switched off. The battery
will not be charged with the on/off On/Off switch (1)
in the On position.
• Plug the charging base (11) into a standard 120 Volt
60 Hz electrical outlet.
PRODUCT FEATURES
Charge only at ambient
A
B
C
4
7
Publicité
