Schneider Airsystems UNM 410-10-50 WX Notice D'utilisation D'origine page 10

GB
UNM 410-10-50 WX
10 Pressure switch with ON/OFF switch
11 Safety valve
12 Pressure gauge (vessel pressure)
13 Pressure gauge (working pressure)
14 Electric motor
15 External protective motor switch
16 V-belt
17 Belt guard grating
18 Filter pressure reducer
19 Safety quick-release coupling (cleaned,
controlled compressed air)
20 Mist oiler
21 Safety quick-release coupling (air con-
taining atomised oil)
38 Guide roller with locking brake
1.6 Compressor inspections
This compressor is subject to a type approval
inspection. As a result, inspections by an au-
I/4
thorised expert prior to commissioning are
no longer necessary. The prototype identi-
fication code is located on the compressor
specification plate.
We recommend that a "qualified person"
perform a pressure test on the vessel after
10 years, depending on general levels of
wear and tear.
A "qualified person" should be well informed
about Ordinance on Industrial Safety and
Health (formerly authorised expert)
Contact any of our approved service part-
ners. Most of our service partners have em-
ployees with expert qualifications.
The papers accompanying the vessel are
approval documents and must be kept
throughout the service life of the vessel.
These specifications only apply in Germa-
ny. Equivalent regulations apply in other
countries.