Grill Chef 12232 Instructions De Montage page 7

Utilisation
Functional elements (see page 3):
A. Ignition
B. Main burner control knob
Starting up the barbecue:
1. Open the lid on the grill unit (1).
2. Open the gas supply on the gas cylinder (see operating manual)..
3. Each burner has its own ignition system and they can therefore be
ignited individually.
Press the control knob, hold it down, and turn it anti-clockwise to
the MAX position. (2) A loud click can be heard; this is the piezo
ignition.
4. Check whether the burner has been ignited. Carefully look through
the cooking grill to see if flames come out of the burner.
5. If the burner has not ignited, press the control knob and turn it
back to the 0 position. Wait for 5 minutes to allow the gas in the
combustion chamber to dissipate.
6. If the burner has ignited, repeat the above steps for the remaining
burners.
WARNING! Open the cover during the ignition process.
WARNING! Do not bend over the cooking area when igniting the
burners.
WARNING! Each burner can be ignited individually.
WARNING! If the burner has not ignited, press the control knob
and turn it back to the 0 position. Wait for 5 minutes to allow the
gas in the combustion chamber to dissipate. Then repeat the ignition
process.
Switching off the barbecue:
1. Close the gas supply on the gas cylinder (see operating manual).
2. Press the control knob and turn it clockwise to the 0 position.
Notes on the side burner:
Exclusively use cookware on the side burner that has been approved
for use on gas cooking appliances.
To ensure the stability of the cookware, the diameter must not
be less than stated:
min. diameter
Ø 16 cm
1
2
max. diameter
Ø 24 cm
7