Publicité
Les langues disponibles
Les langues disponibles
4,
5°
6.
I)ispensers
on Timed
Bleach models
automatically
dispense
bleach
at the proper time in the cycle for optimal
performance,
ensuring
the cleanest
and brightest
loads•
Style 1
liquid chlorine
bleach dispenser
(on some models)
Style 2
Dispenser for
77med Bleach models
Style 3: Without liquid chlorine bleach dispenser (on some
models)
•
I.et the washer
fill and begin agitating
the load.
•
Add bleach
5 minutes
into the wash cycle for best cleaning
and so that bleach
can be removed
in the rinse cycle. Pour
bleach
around
the agitatob
not directly
onto the load to
avoid damaging
clothing
or other items in the load.
(OPTIONAl.)
Add liquid
fabric softener.
NOTE:
I)o not spill or drip any fabric softener
onto the clothes.
Undiluted
fabric softener
can stain fabrics.
Always dilute fabric
softener
with warm water. Using too much fabric softener
can
make some items (diapers and towels)
nonabsorbent.
If this
aaPpens, do not use it in every load, or use less of it in each
Style 1 : With
liquid
fabric softener
dispenser
(on some models)
•
Use only liquid
fabric
softener
in this dispenser.
Pour
measured
liquid
fabric
softener into the dispenser.
Softener
is added automatically
during
the rinse portion
of the cycle.
Dilute
liquid
fabric softener
by filling
the dispenser
with
warm water until liquid
reaches the underside
of the
dispenser
rim. See max fill line arrows.
NOTE:
If your washer
has a Fabric Softener
Switch
(on some
models),
turn the switch
to ON when using fabric softener.
Style 2: Without liquid fabric softener dispenser (on some
models)
•
In the final rinse only, add fabric softener that has been
diluted
with 1/2to 1 cup (125 to 250 ml_) warm water.
Close the washer
lid. Washer
will not agitate or spin with
the
lid open.
Turn the WATER I_EVEI_selector
to the correct
setting for your
wash load size and the type of fabric being washed.
You may
change the water level selection
after the washer starts filling
by turning
the selector
to a different
setting.
•
You may change the load size or water
level selection
after
the washer
has started filling
by turning
the selector to a
different
setting.
NOTE: Your washer
may be equipped
with an Auto I_oad sensing
water level feature that will automatically
sense the size of the
load and add enough
water to efficiently
clean it. To ensure the
washer determines
the proper water level, do not open the lid or
stop the washer anytime
during
or after the fill.
Water may not
cover the top level of the clothes.
This is normal
for Auto I.oad
Sensing washers.
For these models,
the water fill is optimized
by
the system for best wash performance.
7°
Select a Wash Temperature
based on the type of fabric and soil
being washed.
Use the warmest
wash water safe for the fabric.
Follow garment
label instructions.
The Automatic
Temperature
Control
(ATC) (on some models)
electronically
senses and maintains
a uniform
water temperature
by regulating
incoming
hot and cold water.
•
Even in Cool wash, some warm water is let into the washer
to maintain
a minimum
temperature
of approximately
70°F
(21 °C).
Temperature
Guide
Wash Temp
Suggested Fabrics
Hot
Whites
and pastels
Durable
garments
Heavy soils
Warm
Bright colors
Moderate
to light soils
Cool
Colors that bleed or fade
I.ight soils
Cold
Dark colors that bleed or fade
I_ight soils
NOTE:
In wash water temperatures
colder than 60°F (15.6°C),
detergents
do not dissolve
well. Soils can be difficult
to remove.
Some fabrics
can retain wear wrinkles
and have increased
pilling
(the formation
of small lint-like
balls on the surface of garments).
8.
Extra Rinse is available
on some models.
Selecting
this option
provides
a second
rinse. An Extra Rinse can be added
to any
wash cycle.
9.
The SOIl_ I_EVEI_selector
is available
on some models
and may
be used to shorten or lengthen
the wash cycle depending
on the
type of fabric and the degree of soiling.
10. Push in the Timer knob and turn it clockwise
to the wash cycle
you want. Pull out the Timer knob to start the washer.
To stop or restart your washer:
•
To stop the washer
at any time, push in the Timer knob.
•
To restart the washer,
dose the lid (if open) and pull out the
Timer knob.
WASHER CARE
Use a soft, damp
cloth or sponge to wipe
up any spills such as
detergent
or bleach
from the outside
of your washen
Clean your washer
interior
by mixing
1 cup (250 ml_) of chlorine
bleach
and enough
detergent
to equal twice the manufacturer's
recommended
amount
for a normal
wash load. Pour this mixture
into your washer
and run it through
a complete
cycle using hot
water. Repeat this process if necessary.
Remove any hard water deposits
using only cleaners
labeled
as
washer
safe.
Cleaning
the liquid
fabric softener
dispenser (on some models):
1.
Remove dispenser
by grasping top with both hands and
squeezing,
while
pushing
upward
with thumbs.
4
Publicité
