T-Fal FILTRA ONE Guide De L'utilisateur page 4

TF_FRYERS_FILTRAONE_NC00026838-02_Mise en page 1 05/06/12 10:19 Page6
15. Before use, check that your local voltage corresponds with the
EN
specifications shown on the appliance nameplate located under
the fryer.
16. Only connect the appliance to electrical sockets which have a
minimum load of 15A. If the sockets and the plug on the
appliance should prove incompatible, get a professionally
qualified technician to replace the socket with a more suitable
one.
17. This electrical equipment operates at high temperatures which
may cause burns. Do not touch the filter, window, metal walls
(depending on model), or other apparent metal parts.
18. To ensure safe operation, oversized foods must not be inserted
into the fryer.
19. Ensure that the lid and bowl are completely dry after washing
and before use.
20. Never immerse the fryer basket into the hot oil - or drain it -
without the fryer lid in place.
21. The oil level must always be between the Min. and Max. mar-
kings.
22. Do not overload the basket. For safety reasons never exceed
the maximum quantity.
23. Never operate your fryer without any oil.
24. The cooking times are given as guidelines only.
25. The oil must be filtered regularly and changed after 8 to 12
uses.
26. Do not mix different types of oil.
27. If you use solid vegetable shortening, cut it into pieces and
melt it over low heat in a separate pot beforehand, then slowly
pour it into the deep fryer pot. Never put solid shortening
directly into the deep fryer pot or basket, as this will lead to de-
terioration of the fryer.
28. If the fryer has a removable pot, never remove it while the
deep fryer is on.
29. This model is equipped with a permanent metallic filter, which
does not need to be changed.
6