HomeMatic IP HmIP-P-DRG-DALI Notice D'installation Et D'emploi page 42

Maintenance and cleaning
9 Maintenance and cleaning
The product does not require any maintenance. Leave any mainte-
nance or repair to a specialist.
The mains voltage must be disconnected before the device is re-
moved (trip the miniature circuit-breaker). Only qualified electricians
(to VDE 0100) are permitted to carry out work on the 230 V mains.
Clean the device using a soft, clean, dry and lint-free cloth. Do not use
any detergents containing solvents, as they could corrode the plastic
housing and label.
10 Technical specifications
Device short description:
Supply voltage:
Current consumption:
Power consumption
Standby:
Cable type and cross section: rigid and flexible cable
Installation: mounting rail (DIN rail) according to EN 60715
Protection rating:
Ambient temperature:
Dimensions (W x H x D):
Weight:
DALI
Rated voltage:
Current:
Number of DALI devices:
Number of DALI groups:
Subject to modifications.
42
HmIP-P-DRG-DALI
230 V~/50 Hz
45 mA max.
1 W typ. (display lighting off)
0.75-2.5 mm²
IP20
-5 to +40 °C
72 x 90 x 69 mm (4 TE)
195 g
16 V (typ.)
DC
130 mA (typ.), 250 mA (max.)
32
16