HomeMatic IP HmIP-P-DRG-DALI Notice D'installation Et D'emploi page 32

Function and device overview
3 Function and device overview
The Homematic IP DALI gateway is easy to mount on a DIN rail in a pow-
er distribution panel. Once installed, DALI lights around the home can be
assigned to the gateway's channels. Various lighting groups can then be
set up via the Homematic IP smartphone app or CCU3, so that for exam-
ple the lights can be conveniently switched via paired wireless buttons or
wireless remote controls, or optionally via the Homematic IP smartphone
app. A total of up to 32 DALI lights can be controlled and also combined
into as many as 16 groups.
The DALI gateway enables the use of the following DALI types:
• Fluorescent lamps (DT0)
• Discharge lamps (DT2)
• Low-voltage halogen lamps (DT3)
• Dimmer for incandescent lamps (DT4)
• Conversion to DC DC (0–10V, DT5)
• LED modules (DT6)
• Switching function (DT7)
• Colour and colour temperature control (DT8)*
• DALI emergency lighting not supported
* Colour and colour temperature configurable only with DT8
Device overview (see fig. 1):
(A) System button (pairing button and LED)
(B) Connection terminals for DALI
(C) Channel button
(D) Select button
(E) LC display
(F) Ethernet connection
(G) Connection terminals for external and neutral conductor
32