HomeMatic IP HmIP-P-DRG-DALI Notice D'installation Et D'emploi page 38

Operation
6.1 Operating added DALI devices
System button
Briefly pressing the system button (see Figure 9) lets you activate the LCD
background lighting.
Channel button
By pressing the channel button briefly (see figure 10) you can select the
desired channel. On each button press, you can switch to the next chan-
nel. The selected channel is indicated by the flashing symbol. The current
state of the selected channel (0-100 %) is indicated in the display.
Select button
After selecting a channel via the channel button (see 'Channel button'),
you can select the output channel state by briefly pressing the select but-
ton (see Figure 11) (e.g. 0-100 %). On each button press, you can switch
to the next condition.
6.2 DALI-specific functions
• The DALI-specific functions can be activated by a long press on
the Select button (see figure 11).
• The symbol flashes in the display
• You can switch the di erent functions by briefly pressing the
Channel button:
• Long press the Select button to start the function for which the
icon is flashing. The symbol is constantly displayed.
Symbol
38
->
Function
Search for unad-
dressed DALI devic-
es on the DALI bus
-> -> ->
Description
Found devices are addressed and
assigned to the next free chan-
nels (1..32).