Publicité
Les langues disponibles
Les langues disponibles
You can pair the device with either the access point or the Homemat-
ic Central Control Unit CCU3. For detailed information, please refer
to the Homematic IP User Guide, available for download in the
download section of www.homematic-ip.com.
To integrate the device into your system and to enable control via the free
Homematic IP app, you must first add the device to your Homematic IP
access point.
Proceed as follows to add the device:
•
Open the Homematic IP app on your smartphone.
Select the menu item "Add device".
•
•
After the main fuse is reset, the actuator's pairing mode remains
activated for 3 minutes.
You can manually start the pairing mode for another 3 minutes by
pressing the system button (A) briefly (see fig. 8).
•
Your device will automatically appear in the Homematic IP app.
•
To confirm, enter the last four digits of the device number (SG-
TIN) in your app, or scan the QR code. The device number can be
found on the sticker supplied or attached to the device.
•
Wait until pairing is completed.
If pairing was successful, the LED (A) lights up green. The device
•
is now ready for use.
•
If the LED lights up red, please try again.
•
In the app, give the device a name and allocate it to a room.
6
Operation
Via the following push-buttons, simple operating functions are available
directly on the device:
•
System button (A)
•
Channel button (C)
•
Select button (D)
Operation
37
Publicité
