Publicité
Les langues disponibles
Les langues disponibles
R A list of all cameras
Information for current hub
users
If your mobile device is already
registered to a hub and you want
to use your camera by itself (i.e.,
you do not want to integrate the
camera with your Panasonic
Home Network System), perform
the following.
1
Plug in the camera and wait
about 1 minute for the
camera's LED to light in green.
R If the LED does not light in
2
Start the [Home Network]
app.
3
From the [Home Network]
app home screen, tap
[Settings].
For assistance, visit www.panasonic.ca/english/support
HNC805C_(en_en)_0902_ver.110.pdf
All manuals and user guides at all-guides.com
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
registered to the app is
displayed when initial setup
is complete.
green, or if you experience
trouble during this
procedure, reset the
camera (page 24) and
then repeat this procedure.
21
4
Tap [Device Registration] ®
[Registration] ® [HD
Camera] ® [Method 2].
5
iPhone, iPad users
Continue from step 4 of the
initial setup procedure on
page 18.
Android device users
Continue from step 4 of the
initial setup procedure on
page 20.
Setup
21
2016/09/05
13:39:11
Publicité
