Panasonic KX-HNC805C Guide D'installation page 14

Setup
LED indicator
You can use the LED indicator to confirm the camera's status.
Indicator
Off
Blue, lit
White, lit
White, blinking quickly Camera is searching for wireless router
Green, lit
Green, blinking slowly
Green, blinking
Red, lit
Red, blinking slowly
Red, blinking
*1 You can configure the camera so that its LED indicator does not light
during normal operation or when motion is detected. For more
information, refer to the User's Guide (page 30).
14
HNC805C_(en_en)_0902_ver.110.pdf
All manuals and user guides at all-guides.com
Status
No power, or LED indicator is turned off
Normal operation, connected to wireless
router
Normal operation, connected to wireless
router
Initial setup required
Initial setup is in progress with mobile device
connected
Initial setup is starting
Motion detected
Live images are being viewed or recorded, or
camera is starting up
Device malfunction
For assistance, visit www.panasonic.ca/english/support
14
*1
, privacy shutter is open
*1
, privacy shutter is closed
*1
, or camera is starting up
*1
2016/09/05 13:39:11