OVE SIERRA 60 TUB DOOR Manuel D'installation page 9

1-2. Cut the fixed panel's bottom seal strip (N) to size and attach the strip (N) on the fixed glass panel (C).
3-4. Mark the position of sliding door guide (Q) and drill the hole.
5. Install the sliding door guide (Q) using the screws (CC).
6-7. Place the fixed glass panel (C) in the sliding door guide (Q) and the track (B).
Note: The wall track (B) allows you to adjust the position of the fixed glass panel (C). Adjusting the
depth and/or giving the fixed glass panel a slight angle allows for precise alignment with the door.
8. Using a 3mm drill bit, drill pilot holes at the top, the center and the bottom of the rail (B).
9. Secure the fixed glass panel (C) using screws (DD) and cap (EE) & fitting (FF).
C
N
FIXED PANEL INSTALLATION
All manuals and user guides at all-guides.com
7
Q
C
714mm
Helpful Hint
Add a drop of
silicone in the
holes before
inserting the
screws
9
1
N
40mm
N
N
3
Q
20mm
5
CC
B
Q
8
2
C
4
Φ4mm
6
C
9
EE
FF
DD