Publicité
Les langues disponibles
Les langues disponibles
Setting the decoder
Editing the channel overview
It is described below how you can change the sequence of stored TV channels or delete them from the channel overview.
ENGLISH
All manuals and user guides at all-guides.com
You can use the SCART1 or SCART2 input to connect
a decoder for coded TV channels (pay TV).
S
Select <Decoder> [
] / [
].
Y
B
You have the following selection options:
Decoder
Decoder
Sound
Off
Uncoded
Decoder A SCART1
Uncoded
Decoder B SCART1
Coded
Decoder A SCART2
Uncoded
Decoder B SCART2
Coded
S
Press the [MENU] button to open the main menu.
S
With the button [
] or [
] select the <Setup> menu.
A
"
S
Select <Tuner> with the button [
the button [
].
"
S
Select the menu option <Edit station list> [
and press the button [
].
"
The menu <Editing the channel overview> appears on
screen.
S
With the buttons [
] select the channel that
YBA"
is to be shifted.
S
Press the yellow button (mark). The channel is
marked yellow.
S
With the blue button (sorting mode) you can
change over between swap and insert.
Sorting mode Swap
S
Select a channel with which you would like to
swap the marked channel.
Use the buttons [
] to do this.
YBA"
S
Press the yellow button (swap) to execute the
procedure.
Sorting mode Insert
S
Press the blue button (sorting mode) to execute
the sorting mode Insert.
S
Select a channel in the position of which you
would like to insert the marked channel. Use the
buttons [
] to do this.
YBA"
S
Press the yellow button (Insert) to execute the
procedure.
Deleting a channel
S
With the buttons [
] select the channel that
YBA"
is to be deleted.
S
Press the green button (Delete) to delete the se-
lected channel from the channel overview.
S
To close the menu, press the red button.
TV channel
Picture
Uncoded
Coded
Coded
Coded
Coded
] or [
] and press
Y
B
] / [
]
Y
B
17
Publicité
