Bosch KGN Serie Manuel D'utilisation page 15

Over-and-under and side-by-side
installation
If you want to install 2 refrigerating
appliances one over the other or side
by side, you must maintain a clear-
ance of at least 150 mm between the
appliances. Selected appliances can
be installed without a minimum clear-
ance. Ask your dealer or kitchen
planner about this.
4.3 Installing the appliance
Install the appliance in accordance
▶
with the enclosed installation in-
structions.
4.4 Preparing the appliance
for the first time
Remove the informative material.
1.
Remove the protective foil and
2.
transit bolts, e.g. remove the ad-
hesive strips and carton.
Clean the appliance for the first
3.
time. → Page 24
4.5 Connecting the appliance
to the electricity supply
Insert the non-heating appliance
1.
plug of the power cable into the
appliance.
Insert the mains plug of the appli-
2.
ance's power cable in a socket
nearby.
The connection data of the appli-
ance can be found on the rating
plate. → Fig.
Check the mains plug is inserted
3.
properly.
a The appliance is now ready for
use.
/
5
1
Familiarising yourself with your appliance en
5 Familiarising yourself
with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→ Fig.
1
Refrigerator compartment
A
→ Page 21
Freezer compartment
B
→ Page 21
Lighting
1
Bottle shelf → Page 16
2
Interior ventilation opening
3
Temperature controller (stor-
4
age container) → Page 18
Rating plate → Page 30
5
Storage container
6
→ Page 16
Fruit and vegetable container
7
with humidity control
→ Page 16
Frozen food container
8
→ Page 24
Screw foot
9
Control panel → Page 16
10
Door storage compartment
11
for large bottles → Page 17
Note: Deviations between your appli-
ance and the diagrams may differ
with regard to their features and size.
15