Receiver Operations; Selecting A Component - Sony STR-GA8ES Mode D'emploi

Receiver Operations

Receiver Operations

Selecting a Component

To listen to or watch a connected component, first
select the function on the receiver or with the remote.
Before you begin, make sure you have:
• Connected all components securely and correctly as
indicated on pages 5 to 9.
• Turned MASTER VOL to the leftmost position (0) to
avoid damaging your speakers.
POWER
1
Press POWER to turn on the receiver.
2
Turn FUNCTION to select the component you
want to use:
To listen to or watch
Records
Radio programs
Compact Discs (CD)
Digital Audio Tapes (DAT)
or MiniDiscs (MD)
TV programs or DBS
Video tapes
Laser discs
To listen to analog audio cassettes
Press TAPE MONITOR, the button's indicator lights up
and "TAPE" appears in the display.
To listen to decoded AC-3 program sources
Select a video source (TV, LD, VIDEO 1, VIDEO 2, or
VIDEO 3) then press 5.1 INPUT, the indicator on the
button lights up. The receiver memorizes 5.1 INPUT
on/off setting independently for each source.
3
Turn on the component, for example, a CD player,
and then start playing.
To tune in radio stations on this receiver, see
"Receiving Broadcasts" on page 11.
4
Turn MASTER VOL to adjust the volume.
To adjust the volume of the TV's speakers, use the
volume control on the TV.
10 EN
FUNCTION
MASTER VOL
Select
PHONO
TUNER
CD
DAT/MD
TV/DBS
VIDEO 1, VIDEO 2
or VIDEO 3
LD
To Do This
Mute the sound Press MUTING on the remote.
The MUTING indicator on the
front panel lights up.
Press again to restore the sound.
Reinforce the bass Press BASS BOOST to turn on
the BASS BOOST indicator
Adjust the balance Turn the BALANCE control to
the left (L) or right (R).
When you listen with headphones
Connect the headphones to the PHONES jack and set
the SPEAKERS selector to OFF.
When you want to enjoy high quality sound
Press DIRECT PASS to bypass the tone controls, bass
reinforcement, and surround effects.
The indicator on the button lights up.
When you want to adjust the brightness of the
display
Press DIMMER repeatedly to select the brightness you
desire.
Watching video programs
When you watch TV or video programs, we
recommend you play audio portion through the
receiver instead of your TV's speaker. This lets you
take advantage of the receiver's surround sound
effects, like Dolby Surround, and lets you use the
receiver's remote to control the audio.
Turn off the speakers on your TV before you start so
you can enjoy the surround sound from your receiver.
To watch TV programs, turn on both the TV and the
receiver and turn FUNCTION to select TV.
To watch videos or laser discs, do the following:
1
Turn FUNCTION to select the component (for
example, VIDEO 1).
2
Turn on the TV and set the TV's video input to
the receiver.
3
Turn on the component (VCR or LD player), and
start playback.