Publicité
Les langues disponibles
Les langues disponibles
Power and Sound Controls
continued
4
Tone Enhancement
(Only for CQ-DPG500EUC)
• Press and hold LOUD for more than 2 seconds to enhance bass
and treble tones when listening at low or medium volume.
• Press and hold LOUD again for more than 2 seconds to
deactivate.
Changing Audio Modes
Press SEL to switch the audio mode in the following order.
<For CQ-DPG550EUC>
<For CQ-DPG500EUC>
VOLUME
•
BASS
*
TREBLE
VOLUME
•
BASS
»
TREBLE
•
•
*
I
SUB
*
FADER
«
BALANCE
FADER
«
BALANCE
Bass and Treble
Press SEL to select the BASS (TREBLE) mode. Press "VOL/^" or
"VOLv" to increase or decrease the bass/treble response.
+
-12 to 12
3H5+ 9d3 TRE- 3d3
+
-12 to 12
• Press "VOL^" or "VOLv" for more than a half second to change
numeric levels on the display rapidly.
Balance
• Press SEL to select the BALANCE mode.
Press "VOL/^" or
"VOL^" to shift the sound volume to right or left speakers.
URL R
I
15
2RL
r m r
LIV i
1
orL
i
1 to 15
-
1
-
Balance Center
• Press "VOL^" or "VOLv" for more than a half second to change
numeric levels on the display rapidly.
Fader
• Press SEL to select the FADER mode. Press "VOL^" or "VOLv"
to shift the sound volume to the front or rear speakers.
Ffl
T?
JJ
F 15
_i-1-
FF
7?
riur
JJ
LJV
i
-1-
or R
1 to 15
Fader Center
• Press
"VOL/\"
or "VOLv" for more than a half second to change
numeric levels on the display rapidly.
Note:
When a control mode (BASATRE/BAL/FAD[/SUB(Only for CQ-DPG550EUC))) is selected but
no operation is made within 5 seconds(2 seconds at volume mode), the display will return to the
normal operation (Radio, CD, etc) mode. In such a case, press SEL again to select the control mode.
8
CQ-DPG550/DPG500EUC
Publicité
