Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
continued
■
E
N
G
L
I
□ Installation Procedures
1. Secure the Mounting Collar
0
.
Insert Mounting Collar © into the car's dashboard, and bend mounting tabs out with a screwdriver.
2. Secure the rear of the unit
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt (D, using a suitable wrench.
c) Insert the unit into Mounting Collar © and push it in unit "click" is heard.
d) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap ©
Affix one end of the Rear Support Strap © to the rear of the unit, and the other end to the Fire Wall of
Car, or some other metallic area.
Publicité
