Publicité
Les langues disponibles
Les langues disponibles
Power and Sound Controls
I
1
Power
If the car is not already running, turn the key in the ignition until the
accessory indicator lights.
Press PWR to switch on the power. Press PWR again to switch off
the power.
Note:
When a CD is inserted with all power connected, the unit
power will automatically turn on and CD loading begins and plays.
When power is switched on for the first time, greeting words display.
To cancel this display, press DISP.
" to increase or decrease volume.
Volume Level
Oto 40
Volume
Press "VOL/n" or "VOLv
m
m
un
V
UL
1u-
___
l—
t
Press "VOL^" or "VOL^" for more than a half second to change
numeric levels on the display rapidly.
Attenuator
• Press ATT. Volume will decrease to about 1/10 of its previous level.
• Press ATT again to deactivate when listening at normal volume.
mi
S*HDB (Super High Definition Bass)
(Only for CQ-DPG550EUC)
Especially for rock music, the bass-sound will be more powerful.
• Press and hold S*HDB for more than 2 seconds to be able to listen
to high-definition bass.
• Press and hold S*HDB again for more than 2 seconds to return to
the normal tone.
5'HDB
Note:
This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume
level adjuster so that you will not be deafened sudden loud volume.
This system operates as follows. When PWR is switched on, the volume level is low. After that, the
volume level gradually returns to its previous level prior to switching off the unit.
Anti-volume-blast circuit is not effective when volume level is lower than position 20 at the display.
CQ-DPG550/DPG500EUC
7
Publicité
