Table des Matières
Publicité
38
Routine control and maintenance operations
1) The motor-sweeper must be inspected by a skilled technician who checks its safety or for any damage or defects in the
following cases:
• before it is put into operation
• after modifications or repairs
• at regular intervals, as indicated in the "Routine maintenance and control operations" table.
2) Every six months check that the safety devices are in good working order; the inspection must be made by authorized
specialist staff.
To ensure that the safety devices are operating properly, the machine must be overhauled by specialist staff every 5 years.
3) The person in charge of the machine must make an annual check on its condition. During this check, he must decide
whether the motor-sweeper still complies with the technical safety regulations, and then apply a marker plate to the
machine to indicate that the check has been made.
Periodical maintenance checks
1
Check belts
2
Check that the main brush is free fom wires, strings, etc.
3
Check dust filter
4
Replace dust filter
5
Check main and side brushes trace width
6
Check the battery liquid
7
Check motor brushes
and safety checks
Intervals in hours
8
40
150
500
1500
Publicité
Table des Matières
