OXO (T)Box G2 Mode D'emploi page 15

• To start select Start lndentify or Stop lndenitfy to stop the indentification.
• Select Only Self to choose three different options; Only Self, Same mfrs or Ali Device. Select
Only self: only the connected fixture will be selected.
• Select Same mfrs: only the same fixtures from the same manufacturer will be selected.
• Select Ali Device: ali fixtures which are linked to the connected fixture will be selected.
• Turn the jog wheel to select Ok&Save to store this parameter.
• Press the jog wheel to confirm.
• Select Exit to return to the previous submenu. Press the jog wheel to confirm.
• To obtain info about the connected fixture, select the parameter Device lnfo, the display
shows for example:
• Turn the jog wheel to select Get parameter.
• Press the jog wheel to confirm, the display shows:
• To scroll through the pages select More lnfor.
• Select Fresh to update the info or Exit to return to the previous submenu.
• Press the jog wheel to confirm.
• To set the DMX address select the parameter DMX Start Address, the display shows:
User Manual - [T]Box G2
V1.2 11/2021 15/52