OXO (T)Box G2 Mode D'emploi page 11

• Select Multi Channel Mode in the DMX 512 Send submenu, the displays shows:
• ln this mode you con adjust the starting channel (Start Channel), the display format (Format)
and the output level of the DMX channels.
- Start channel: Turn the jog wheel to set the starting DMX channel, the adjustment range is
between 0-51 2.
- Output level of the channels: Turn the jog wheel to set the output level of the DMX channels,
the adjustment range is between 0-255.
- Format: Turn the jog wheel to change the display format, choose Decimal, Percents, BAR,
RGB, BRG or Hexadecimal.
- To reset the output level of the DMX channels, select Ali Reset. Press the jog wheel to
confirm.
- Select Exit to return to the previous submenu. Press the jog wheel to confirm.
- Select Color Demo Mode in the DMX 512 Send submenu, the displays shows:
• ln this mode you can adjust the pixel type, starting channel, master level, speed level or fade
time.
- Pixel type: You can either select an 8-bit or 16-bit fixture (each consists of 9 colors).
- Start Channel: Set the starting address of the first fixture, between 001-512.
- Master Level: Set the maximum value of the DMX output, between 0-255.
- Speed level: Set the data speed, between 0-10 or manual.
- Fade Time: Set the data fade time ratio, between 0-100%.
• Select Exit to return to the previous submenu. Press the jog wheel to confirm.
User Manual - [T]Box G2
V1.2 11/2021 11/52