Rotel U791CH1 Mode D'emploi page 56

DRY mode
o Press MODE until the DRY indicator
lights on the panel.
o Temperature and speed are not adjust-
able when this mode is selected.
o Unscrew the drainage cover, and open
the water plug.
o Set the drainage pipe into the water
outlet.
o Connect the drainage pipe to a bucket.
o Note: In Dry mode, please dismantle
the exhaust pipe, or the performance
will be affected, and the water full
alarm "FL" will buzz.
Timer
o When the unit is in standby, first press TIMER button to go to delay stop setting (from
1h to 24h), until the indicator LED lights. The display will blink.
o When the air conditioner is running, press the TIMER button, the timer indicator LED
is on, and the display will blink.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
56