Switching The Seek Mode; Switching The Reception Mode; Multi-Cd Player; Basic Operations - Pioneer DEH-P5100UB Mode D'emploi

Section
06 Available accessories

Switching the seek mode

There are two method of seek tuning settings,
one is Seek HD (Digital broadcasting stations
seek) and the other is Seek ALL (normal seek).
1 Use MULTI-CONTROL to select
Seek Mode in the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
Seek ALL—Seek HD

Switching the reception mode

If a digital broadcast reception condition gets
poor, this unit automatically switches to the
analog broadcast of the same frequency level.
If this function is set to on, the tuner switches
between digital broadcast and analog broad-
cast automatically. If this function is off, recep-
tion will be conducted within an analog
broadcast.
1 Use MULTI-CONTROL to select Blending
in the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
ON—OFF

Multi-CD Player

Basic Operations

You can use this unit to control a multi-CD
player, which is sold separately.
! Only functions described in this section can
be operated.
! Only functions described in this manual are
supported by 50-disc multi-CD players.
! This unit is not designed to operate disc title
list functions with a 50-disc multi-CD player.
For information about the disc title list func-
54
En
tions, refer to Selecting discs from the disc
title list on page 57.
1 Disc number indicator
2 Track number indicator
3 Play time indicator
% Select a disc
Push MULTI-CONTROL up or down.
% Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
% Select a track
Push MULTI-CONTROL left or right.
Notes
! When multi-CD player completes preparatory
operations, READY is displayed.
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner's
manual.
! If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.

Using CD TEXT functions

You can use these functions only with a CD
TEXT compatible multi-CD player.
The operation is the same as that of the built-
in CD player.
Refer to Displaying text information on disc on
page 14.