Publicité
Les langues disponibles
Les langues disponibles
extension cord from the receptacle before disconnecting
the product from the extension cord.
•
Do not use the appliance if a supply cord or important
parts of the appliance are damaged, e.g. safety devices,
high pressure hoses, trigger gun.
•
Inadequate extension cords can be dangerous.
•
To reduce the risk of electrocution, keep all connections
dry and off the ground. Do not touch plug with wet hands.
•
Do not abuse the cord. Never use the cord to carry the
product or to disconnect the plug from an outlet. Keep
cord away from heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
•
Inspect extension cords periodically and replace if
damaged. Keep handles dry, clean, and free from oil or
grease.
2.3
EXTENSION CORD SAFETY
WARNINGS
When using a power tool at a considerable distance from a
power source, be sure to use an extension cord that has the
capacity to handle the current the product will draw.
•
An undersized cord will cause a drop in line voltage,
possibly resulting in overheating, loss of power, and/or
circuit breaker or GFCI tripping. Use the chart to
determine the minimum wire size required in an
extension cord.
Cord Length
25 ft.
50 ft.
100 ft.
•
When working outdoors with a product, use an extension
cord that is designed for outside use. This type of cord is
designated with "WA" or "W" on the cord's jacket.
•
Before using any extension cord, inspect it for loose or
exposed wires and cut or worn insulation.
•
It is possible to tie the extension cord and power cord in a
knot to prevent them from becoming disconnected during
use. Make a knot, then connect the plug end of the power
cord into the receptacle end of the extension cord. This
method can also be used to tie two extension cords
together.
•
This product has a precision-built electric motor. It should
be connected to a power supply that is 120 volts, AC only
(normal household current), 60 Hz.
•
Do not operate this product on direct current (DC).
•
A substantial voltage drop will cause a loss of power and
the motor will overheat.
•
If the product does not operate when plugged into an
outlet, doublecheck the power supply.
English
Wire Size (A.W.G.)
12
Not Allowed
Not Allowed
2.4
GROUND FAULT CIRCUIT
INTERRUPTER PROTECTION
This pressure washer is provided with a ground-fault circuit-
interrupter (GFCI) built into the plug of the power-supply
cord. This device provides additional protection from the risk
of electric shock. Should replacement of the plug or cord
become necessary, use only identical replacement parts that
include GFCI protection.
2.5
PRESSURE WASHER SAFETY
WARNINGS
•
Do not direct the jet against yourself or others in order to
clean clothes or footwear.
•
High pressure jets can be dangerous if subject to misuse.
The jet must not be directed at persons, animals, electrical
devices, or the machine itself.
•
To ensure appliance safety, use only original spare parts
from the manufacturer or approved by the manufacturer.
•
Use only recommended accessories. The use of improper
accessories may cause risk of injury.
•
When servicing use only identical replacement parts. Use
of any other parts may create a hazard or cause product
damage.
•
Do not use product if switch does not turn it off. Have
defective switches replaced by an authorized service
centre.
•
Do not use the appliance if a supply cord or important
parts of the appliance are damaged, e.g. safety devices,
high pressure hoses, trigger gun.
•
Use correct product. Don't force product or attachment to
do a job it was not designed for. Don't use it for a purpose
not intended.
•
Never leave product running unattended. Turn power off.
Don't leave product until it comes to a complete stop.
•
Keep the motor free of grass, leaves, or grease to reduce
the chance of a fire hazard.
•
Keep the motor away from flammables and other
hazardous materials.
•
Keep product dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum-based products, or any
solvents to clean product.
•
Do not use acids, alkalines, solvents, flammable material,
bleaches, or industrial grade solutions in this product.
These products can cause physical injuries to the operator
and irreversible damage to the machine.
•
This Appliance has been designed for use with the
cleaning agent supplied or recommended by the
manufacturer. The use of other cleaning agents or
chemicals may adversely affect the safety of the
appliance.
•
Check bolts and nuts for looseness before each use. A
loose bolt or nut may cause serious motor problems.
•
ONLY use cold water.
5
EN
Publicité
