Publicité
Les langues disponibles
Les langues disponibles
EN
4.4
ADD DETERGENT
Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
Do the instructions on the solution bottle to prepare
detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
Soap/detergent can only be applied with this machine when
the black nozzle(75 degree) is installed.
1. Put the machine vertically on a flat surface..
2. Open the cap on the deterfent tank.
3. Put the detergent into the detergent tank.
4. Close the cap.
Do not let detergent dry on the surface to prevent streaks.
WARNING
WARNING
NOTE
NOTE
NOTE
English
4.5
START THE MACHINE
Do not operate without the water supply connected.
Before you start the machine:
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water comes out from the gun,
release the gun trigger.
1. Connect the machine to the power supply.
2. Set the power switch to the "ON" ( | ) position.
3. Turn the water supply on.
4. Pull the gun trigger.
4.6
STOP THE MACHINE
1. Release the gun trigger.
2. Set the power switch to the "OFF" (O) position.
If you do not use the machine：
•
Stop the machine.
•
Turn the water supply off.
•
Disconnect the power cord from the outlet.
•
Pull the gun trigger to release the remaining pressure
from the machine.
•
Lock the trigger safety button.
5
MAINTENANCE
Before maintenance, make sure that you
•
stop the machine.
•
wait until all the moving parts stop.
•
disconnect the plug from the power source.
10
CAUTION
CAUTION
WARNING
WARNING
Publicité
