Publicité
Les langues disponibles
Les langues disponibles
1.
Loosen and remove the four screws securing the
pad to the sanding base.
Fig.16
► 1. Screws 2. Pad 3. Sanding base
2.
Replace the standard-equipped pad with a trian-
gular/rectangular pad.
3.
Re-tighten the screws firmly to secure the triangu-
lar/rectangular pad.
Triangular pad
Fig.17
► 1. Screws 2. Triangular pad 3. Sanding base
You can install the abrasive paper on the side of the pad
as illustrated.
1
2
1
Fig.18
► 1. Abrasive paper 2. Pad
Rectangular pad
1
2
3
Fig.19
► 1. Screws 2. Rectangular pad 3. Sanding base
4.
gular/rectangular pad.
5.
paper to the triangular/rectangular pad, aligning the
dust-suction holes in the paper with those in the pad.
Triangular pad
1
1
2
2
3
Fig.20
► 1. Abrasive paper 2. Triangular pad 3. Dust-suction
holes
10 ENGLISH
Remove all dirt and foreign matter from the trian-
Attach a sheet of optional hook-and-loop abrasive
1
3
2
1
2
3
3
3
1
Publicité
