Télécharger Imprimer la page

Bosch Perf Line KOGA Kiox BUI330 Manuel D'instructions page 54

Masquer les pouces Voir aussi pour Perf Line KOGA Kiox BUI330:

Publicité

Activity tracking
In order to record activities, you must be registered with and
logged into the eBike Connect portal and the eBike Connect
app.
To record activities, you must consent to the storage of your
location data either in the portal or the app. Without this,
your activities will not be shown in the portal or the app.
Your position is only recorded if the on-board computer is
connected to the eBike Connect app.
Once synchronisation is complete, the activities will be dis-
played in the app and in the portal.
eShift (optional)
eShift is the integration of electronic gear-shifting systems
into the eBike system. The eShift components are electric-
ally connected to the drive unit by the manufacturer. The
separate operating instructions describe how to operate the
electronic gear-shifting systems.
eSuspension (optional)
eSuspension is the integration of electronic shock absorp-
tion and suspension elements into the eBike system. You
can use the Quick Menu to select predefined settings for the
eSuspension system.
For details of these settings, please refer to the operating in-
structions provided by the eSuspension manufacturer.
eSuspension is only available in combination with the Kiox
on-board computer and can only be used with the BDU450
CX, BDU480 CX and BDU490P drive units.
ABS – anti-lock braking system (optional)
If the wheel is fitted with a Bosch eBike ABS with no external
control lights, the control lights will be shown on the display
when the system starts and in the event of a fault. For de-
tailed information on the ABS and how it works, please refer
to the ABS operating instructions.
Lock (premium function)
You can buy this function from the <Shop> in the eBike Con-
nect app. Once the Lock function is switched on, the eBike
drive unit assistance is deactivated. It can only then be activ-
ated using the on-board computer associated with the eBike.
Detailed operating instructions can be found online at
www.Bosch‑eBike.com/Kiox‑manual.
Software updates
Software updates are transferred to the on-board computer
in the background of the app as soon as it is connected to
the app. When an update is complete, this will be displayed
the next three times the on-board computer is restarted.
Alternatively, you can check in the <Sys settings> whether
an update is available.
Bosch eBike Systems
Powering external devices via the USB port
The USB port can be used to operate or charge most devices
that can be powered via USB (e.g. various mobile phones).
Charging requires the on-board computer to be mounted
and a sufficiently charged battery to be inserted in the eBike.
Open the protective cover (17) for the USB port on the on-
board computer. Use a Micro-A – Micro-B USB charging
cable (available from your Bosch eBike dealer) to connect
the USB port on the external device to the USB port (6) on
the on-board computer.
Once the electrical load has been disconnected, the USB
port must be carefully resealed with the protective
cover (17).
USB connections are not waterproof. When cycling in the
rain, do not connect any external devices and make sure
that the USB port is fully sealed by the protective
cover (17).
Important: If electrical loads are connected, this can affect
the range of the eBike.
English – ​ 5
1 270 020 XBK | (12.03.2019)

Publicité

loading