Publicité
Les langues disponibles
Les langues disponibles
<Example of construction>
Air supply
Air supply duct *1
flange *1
Air intake flange *1
Canvas duct *1
Product main unit
Insulation *1
Check port
(600 × 600) *1
1
Air intake duct
• Connect the air intake duct (Locally procured) to the inlet fl ange.
Wrap aluminum tape around connecting part between the air intake port fl ange and duct, or provide sealer
so that air does not leak.
• For the outside air intake port, attach a hood so that outside air is sucked from lower side.
And attach wire netting, etc. to the air intake of the hood.
• Set the air intake duct at descending inclination so that water can be drained even if rainwater enters in.
• Wrap the outside of the intake duct with insulation because it intakes cold air while heating.
2
Air supply duct
Connect the air supply duct (Locally procured) to the Air supply flange.
Wrap aluminum tape around connecting part of the air supply port flange and duct or apply packing so that air
does not leak.
27-EN
High-efficiency filter
(Sold separately)
Long life prefilter
(Sold separately)
Insulation *1
Air intake duct
*1
Descending
inclination
(Sold separately)
Hood
Filter chamber
Canvas duct *1
(with wire netting)
*1
Wall
*1: Locally procured
– 14 –
EN
FR
ES
28-EN
Publicité
