Bosch GCC 30 TrackTag Professional Mode D'emploi page 23

Before the adhesive hardens, you can use acetone (solvent) to remove excess adhe-
sive from the object or from any tools used for mixing.
Store the two-part adhesive upright, in a cool, frost-free and dry environment (stor-
age life: One year at a room temperature of 22 °C ).
Removing the GCC 30 TrackTag Professional
Do not use force to remove the GCC 30 TrackTag Professional. Do not use any sharp
or pointed tools which may cause damage to the surface of the identified object.
Data Transmission via
The transmission interval of the GCC 30 TrackTag Professional is eight seconds. De-
pending on ambient conditions, up to three transmission intervals may be required
before the GCC 30 TrackTag Professional is detected. If the
GCC 30 TrackTag Professional is not detected, check the following:
– Is the battery too low or drained?
▷ Change the battery (order number 1 600 A00 92A).
– Is the distance to the mobile terminal device too great?
▷ Reduce the distance between the mobile terminal device and the
GCC 30 TrackTag Professional.
Note: During initial set-up, GCC 30 TrackTag Professional modules that are already
assigned to an object are not displayed.
Maintenance and Service
Maintenance and Cleaning
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or sol-
vents.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and re-
pair of your product as well as spare parts. Exploded views and information on spare
parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our prod-
ucts and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit arti-
cle number given on the nameplate of the product.
Bosch Power Tools
All manuals and user guides at all-guides.com
®
English | 23
1 609 92A 19K | (17.7.15)