Télécharger Imprimer la page

ARDES ARCF01 Mode D'emploi page 23

Circulateur d'air été/hiver

Publicité

Les langues disponibles
  • FR

Les langues disponibles

is provided and explained in this manual.
DO NOT cover the device during functioning.
DO NOT insert objects or body parts inside the protection grille of the fan.
DO NOT leave the device unsupervised for a long period during
functioning.
DO NOT expose yourself for a long period to the air flow generated by the
device because it can cause damage to the health.
If the fan must be stored for a long period and is not used regularly, place
the fan in its original packaging in a dry place. When you use it for the
first time after a long period of inactivity, make sure the fan is clean and
the motor blades turn feely (with the device not powered) without any
restraint.
For safety reasons, the appliance should never be opened.
The appliance has been designed and manufactured to operate in the
home. Any other use is considered inappropriate and dangerous.
Do not insert objects through the safety grill or the air inlets.
Do not use the heater in presence of flammable substances (petrol,paints,
etc.).
Do not place the cord near sources of heat.
WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS
OROTHER COMBUSTIBLE MATERIAL.
WARNING: DO NOT COVER THE APPLIANCE OR OBSTRUCT THE
AIR INLETS TO AVOID OVERHEATING.
WARNINGS ABOUT BATTERIES
1. KEEP BATTERIES OUT OF THE REACH OF CHILDREN.
Swallowing can lead to chemical burns, perforation of soft tissue,
and death. Severe burns can occur within 2 hours of ingestion. Seek
medical attention immediately.
2. Do not allow children to replace batteries.
3. Always insert batteries correctly with regard to polarity (+ and -)
marked on the battery and the equipment.
4. Do not short-circuit batteries.
5. Do not charge batteries.
6. Do not force discharge batteries.
7. Do not mix new and used batteries or batteries of different types or
brands.
8. Exhausted
equipment and properly disposed of.
9. Do not heat batteries
10. Do not weld or solder directly to batteries.
11. Do not dismantle batteries.
12. Do not deform batteries.
batteries
should
be
immediately
removed
from
23

Publicité

loading