Kohler K-11160 Guide D'installation page 6

Option 2 - Secure to Countertop
Countertop
Bracket
4. Secure the Lavatory to the Countertop
Use the hardware provided with the lavatory.
Align the bracket with the holes on the lavatory.
Insert the bolt through the bracket and the sink.
Slide the flat washer, lock washer, and nut onto the bolt.
Tighten the nut to secure the bracket to the sink.
Carefully place the lavatory in the cutout using the pencil
guideline to position.
Align the bracket with the countertop.
Using a fastener (not provided) appropriate for you countertop,
secure the bracket to the countertop.
5. Complete the Installation
Apply a thin, continuous bead of sealant around the lavatory
edges.
Immediately wipe away any excess sealant, and fill any voids as
needed.
Verify that the lavatory has not moved out of position.
Allow the sealant to cure for at least 30 minutes before
proceeding.
1085573-2-A
All manuals and user guides at all-guides.com
Lavatory
Washer
Lock Washer
6 Kohler Co.