Kohler K-11160 Guide D'installation page 5

Option 1 - Secure to Wall/Cabinet
Finished Wall
3. Secure the Lavatory to the Wall/Cabinet
IMPORTANT! To secure the lavatory to the countertop, proceed
directly to the next section.
Use the hardware provided with the lavatory.
Slide the fiber washer onto the screws.
Insert the expandable anchor into the hole on the bottom of the
lavatory.
Align the bracket with the anchor hole.
Place the washer on the screw and insert through the bracket into
the anchor.
Handtighten the screw to secure the bracket to the sink.
Carefully place the lavatory in the cutout using the pencil
guideline to position.
Line up the bracket on the wall/cabinet to mark the hole location
for the plastic anchor.
Carefully remove the lavatory from the cutout.
Drill the anchor hole into the wall/cabinet and insert the anchor.
Align the bracket with the anchor on the wall/cabinet.
Place the washer on the screw.
Thread the screw through the bracket into the anchor.
Tighten the screw to secure the bracket to the wall/cabinet.
Kohler Co.
All manuals and user guides at all-guides.com
Countertop Lavatory
Expandable Anchor
Bracket
Cabinet
Fiber Washer
Screw
5 1085573-2-A