Publicité
Les langues disponibles
Les langues disponibles
POWER SUPPLY
Batteries
(supplied or optionally available)
You can use the following batteries with this CD-player:
• normal batteries type LR6, UM3 or AA (preferably Philips), or
• alkaline batteries type LR6, UM3 or AA (preferably Philips).
Note: – Old and new or different types of batteries should not be used in
combination. Remove batteries if they are empty or if the player is
not going to be used for a long time.
Inserting batteries
1 Unfasten the buckle.
2 Open the CD lid.
3 Open the battery compartment and insert either
2 alkaline batteries, or the rechargeable NiMH
battery AY 3362 (if supplied).
Batteries contain chemical substances, so they
should be disposed of properly.
Battery indication
The approximate power level of your batteries is shown in the display.
Battery full
Battery two-thirds full
Battery one-third full
Battery dead or empty. When the batteries are
dead or empty, the symbol A flashes,
bAtt is displayed, and the beep tone sounds repeatedly.
Average playing time of batteries under normal conditions
Battery type
Normal
Alkaline
Rechargeable ECO-PLUS NiMH battery
8
ESP on
ESP off
7 hours
22 hours
19 hours
10 hours
6 hours
9 hours
Publicité
