Télécharger Imprimer la page

Philips ACT 7585 Mode D'emploi page 10

Publicité

Les langues disponibles

Les langues disponibles

POWER SUPPLY / GENERAL INFORMATION
Mains adapter
Use only the AY 3170 adapter (4.5 V/300 mA direct
current, positive pole to the centre pin). Any other
product may damage the player.
1 Make sure that the adapter's voltage
corresponds to the local voltage.
2 Connect the adapter to the 4.5V DC socket of
the player and to the wall socket.
Note: Always disconnect the adapter when you are not using it.
Headphones AY 3678
• Connect the supplied headphones to the p/LINE OUT
socket of the player.
Note: p/LINE OUT can also be used for connecting the
player to your HiFi system (with a signal lead) or to
your car radio (with a cassette adapter or signal
lead). In both cases, the volume of the player must
be set to position 8.
Use your head when using headphones
Hearing safety: Do not play your headphones at a high volume. Hearing experts
advise that continuous use at high volume can permanently damage your hearing.
Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard
and it is illegal in many countries. Even if your headphones are an open-air type
designed to let you hear outside sounds, do not turn up the volume so high that you
cannot hear what is going on around you.
10
(supplied or optionally available)

Publicité

loading

Ce manuel est également adapté pour:

Act7585/01Act7585/11Act7585/16Act7585/00