Publicité
Always unplug appliance and allow to cool completely before cleaning.
1. Turn the appliance OFF by turning timer to zero (0) and unplugging power cord from
wall immediately after cooking. Allow unit to cool completely.
2. Allow glass bowl to cool completely and then clean it thoroughly with warm, soapy water
and a damp sponge or cloth. The glass bowl and accessories are dishwasher safe. For
tough cleaning jobs, pour 1/2 inch of water and some detergent into glass bowl. Replace
top unit/lid and set temperature to 200°F. Set timer to 15 minutes and allow residue to
soften as it is heated. Unplug and allow to cool before continuing with cleaning.
3. The fan cover is located on the underside of the top unit/lid. If needed, it can be
removed and soaked in hot detergent to remove grease. To remove fan cover from
under top unit/lid, unscrew the three screws (see image below) that hold fan cover in
place. This should be done only when the appliance is unplugged and completely cool.
4. Be sure to replace the fan cover prior to next use.
Do not use abrasive cleaners on oven or glass cooking bowl.
Do not wash or immerse the top unit/lid, cord, or plug in water or any other liquid.
The top unit/lid is NOT immersible or dishwasher safe.
Screws
HOW TO CLEAN
Fan Cover
Located on the underside of the top unit/lid
5
Fan Cover
Publicité
