MSI MS-7030 Mode D'emploi page 20

[Colonel]
[General]
[Commander]
MSI Reminds You...
Even though the Dynamic Overclocking Technology is more stable than manual overclocking,
basically, it is still risky. We suggest user to make sure that your CPU can afford to overclocking
regularly first. If you find the PC appears to be unstable or reboot incidentally, it's better to disable
the Dynamic Overclocking or to lower the level of overclocking options. By the way, if you need to
conduct overclocking manually, you also need to disable the Dynamic OverClocking first.
Spread Spectrum
When the motherboard's clock generator pulses, the extreme values (spikes) of the pulses
creates EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI
generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves.
If you do not have any EMI problem, leave the setting at Disabled for optimal system stability and
performance. But if you are plagued by EMI, set to Enabled for EMI reduction. Remember to
disable Spread Spectrum if you are overclocking because even a slight jitter can introduce a
temporary boost in clock speed which may just cause your overclocked processor to lock up.
HT Frequency
This setting specifies the maximum operating frequency of the link transmitter clock. Setting
options: [1x], [2x], [3x], [4x], [5x].
Cool'n'Quiet
It provides a CPU temperature detecting function to prevent your CPU's from overheading due to
the heavy working loading.
Adjust CPU Ratio
This item lets you adjust the CPU ratio. Setting to [Startup] enables the CPU running at the
fastest speed which is detected by system. Setting options are: [Startup], [x4]~[x25].
Adjust CPU FSB Frequency
This item allows you to select the CPU Front Side Bus clock frequency (in MHz). Select the
number between [200]~[300] for needed frequency.
Adjust AGP Frequency
This item allows you to select the AGP frequency (in MHz). Select the number between
[66]~[100] for needed frequency.
CPU Voltage
This feature allows you to trim the voltage of CPU.
Memory Voltage
Adjusting the DDR voltage can increase the DDR speed. Any changes made to this setting may
cause a stability issue, so changing the DDR voltage for long-term purpose is NOT
recommended.
AGP Voltage
AGP voltage is adjustable in the field, allowing you to increase the performance of your AGP
display card when overclocking, but the stability may be affected.
4th level of overclocking, increasing the CPU frequency by 7%.
5th level of overclocking, increasing the CPU frequency by 10%.
6th level of overclocking, increasing the CPU frequency by 15%.
14