Kohler Oblo K-124B16-SANA-CP Instructions D'installation page 5

Finished
Wall
3. Route the Cables and Tube
NOTE: Consult the specification sheet to determine the control box
installation location.
Finish the wall with a 1-3/4" (44 mm) hole for the spout and a
1-1/4" (32 mm) hole for the sensor cables.
Remove the plaster guard.
Feed the sensor cables and tube from the spout through the
mounting bracket and down to the hole for the control box.
Take care to avoid kinking or damaging the cables and tube.
Kohler Co.
All manuals and user guides at all-guides.com
Ø 1-3/4"
(44 mm)
Ø 1-1/4"
(32 mm)
5 1386732-2-A