Samsung RS21 Serie Mode D'emploi page 17

LEVELLING THE
REFRIGERATOR
Now that the doors are back on the refrigerator, you
will want to make sure the refrigerator is level so you
can then make fi nal adjustments.
If the refrigerator is not level, it will not be possible to
get the doors perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than
the fridge
Insert a fl at-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
Screw Driver Screw Driver
When the Freezer door is higher than
the fridge
Insert a fl at-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
Leg Leg
Refer to the next section for the best way to
make very minor adjustments to the doors.
DA68-03316A-00.indb 17 DA68-03316A-00.indb 17
All manuals and user guides at all-guides.com
MAKING MINOR ADJUSTMENTS
TO THE DOORS
Remember, a level refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
levelling the refrigerator.
In the process for adjusting both the doors is the
same. Open the doors and adjust them, one at a
time, as follows:
1. Unscrew the
Leg Leg
2. Adjust the
3. After adjusting the
Screw Driver Screw Driver
English - 17
When the door of the freezer is When the door of the freezer is
higher than the fridge higher than the fridge
nut from the
1
lower hinge until it
reaches the upper
end of the bolt .
2
When you
1
release the nut , make sure that you use
the Allen wrench provided
2
bolt in a counter-clockwise direction.
You should then be able to unscrew the nut
1
with your fi ngers.
height difference
between the doors
by turning the
bolt clockwise
2
or counter
clockwise .
When you turn clockwise
will move up.
doors, turn the
nut clockwise
1
until it
reaches the lower
end of the bolt,
then tighten the
bolt again with the wrench
3
place .
1
If you do not secure the nut fi rmly, the bolt
may release.
Adjustment part Adjustment part
3
Wrench Wrench
2
Bolt Bolt
1
Nut Nut
3
to loosen the
3
Wrench Wrench
2
Bolt Bolt
, the door
3
Wrench Wrench
2
Bolt Bolt
1
Nut Nut
to fix the nut in
2015. 3. 10. 2015. 3. 10. 7:15 7:15