emerio FN-109081 Mode D'emploi page 5

PARTS DESCRIPTION
1. Front fan guard
2. Fan blade
3. Base
4. Speed buttons
ASSEMBLY OF YOUR DESK FAN
Your desk fan has been boxed assembled for immediate use.
OPERATING INSTRUCTIONS
1. Plug the power cord into a suitable socket.
2. Switch on the fan by using the speed buttons on the control panel, i.e. "
medium speed, " " = high speed.
3. Oscillation: to make the fan head oscillate, push down the oscillation knob on the top of the motor housing.
To stop the fan head from oscillating, pull up the oscillation knob.
CAUTION: Press only one of the speed control button at a time. Permanent damage to the switch housing may
result if two or more of the buttons are pressed simultaneously.
CLEANING
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
TECHNICAL DATA
Supply voltage: 220-240V ~ 50Hz
Power consumption: 35W
Eco design requirements
Product information requirements
Maximum fan flow rate (F)
Fan power input (P)
Service value (SV)
Measurement standard for service value
Standby power consumption (PSB)
Fan sound power level (LWA)
Maximum air velocity (c)
Contact details for obtaining more information
- 4 -
All manuals and user guides at all-guides.com
27,31 m³ /min
25,37 W
1,08(m³ /min)/W
IEC 60879: 1986 + cor1 : 1992
0,00 W
58,634 dB(A)
1,98 meters/sec
Emerio Holland B.V.
Zomervaart 1A
2033 DA Haarlem
The Netherlands
T: +31(0)23 3034350
E: info@emerio.eu
" = off, " " = low speed, " " =
FN-109081