Publicité
Les langues disponibles
Les langues disponibles
• Do not cause damage to the part of
the cooling unit that is near the heat
exchanger.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
SN
N
ST
T
3.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
4. OPERATION
4.1 Control panel
Display
1
Temperature warmer button
2
Temperature colder button
3
OK
4
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
3.3 Installation of the
appliance and door reversal
1
6
5
4
Mode
5
ON/OFF
6
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
3
2
ENGLISH
19
Publicité
