Barrette rdi Serie Manuel D'installation page 6

LEVEL ANGLE AND ROUND COLUMN
BRACKET INSTALLATION
Make sure that the aluminum "T" channel is flush with the end of the vinyl top rail. Use a
to drill through both ends of the top rail and aluminum "T" channel. The hole should be located
from the end and /
5
16
aluminum dowel pin through the holes at each end of the rail.
Aluminum
Aluminum
Dowel Pin
dowel pin
5/16"
6
" up from the bottom on both sides of the rail (see detail in (Fig. 17). Place an
Vinyl top rail
Vinyl Top Rail
Top rail wall
Top Rail Wall
Mounting Bracket
mounting bracket
/ "
7
32
diameter hole
Diameter Hole
/ "
5
16
/ "
7
16
/ " drill bit
7
32
/ "
7
16
Fig. 17