Publicité
Les langues disponibles
Les langues disponibles
10. Repeatedly press
during a washing cycle.
The corresponding indicator light (s) will illuminate on the display.
11. Start the washing program by pressing
If you forget to turn on the water tap, after 1-2 minutes the water inlet warning
indicator light
12. At the end of the washing programme, the dishwasher will buzz and automatically
stop.
13. Wait for about 15 minutes before you open the dishwasher door in order to avoid
burns.
14. Unload the dishes.
The washing cycle will not start if the dishwasher door is left open or not properly
closed.
Do not open the door when the dishwasher is working since hot water may be
ejected, which could cause scalding.
Adding extra crockery
1. Without switching off the machine, press
avoid the escaping steam.
2. Place the crockery inside the dishwasher.
3. Close the door and perss
Modifying a washing programme in progress
If a mistake was made during the washing programme selection process it is possible to
change the programme.
1. Press
to pause.
P
2. Press and hold
3. Repeatedly press
The new programme indicator light will illuminate.
4. Press
to start the program.
Child lock function
The function allows you to lock the buttons on the control panel. Children will not be
able to accidentally start the dishwasher by pressing any button.
To activate this function, press and hold
the lock indicator light
To deactivate this function, press and hold the two buttons
simultaneously until the lock indicator light
to select the upper, lower or both baskets to be sprayed
will illuminate.
. The cycle will start from the point at which it was interrupted.
for about 3 seconds. You will hear a beep.
P
to select a new programme.
illuminates.
.
to pause. Open the door, taking care to
and
simultaneously until
goes out.
19
Publicité
