Publicité
Les langues disponibles
Les langues disponibles
Using the Rinse Aid and Detergent Dispensers
Function of the rinse aid and detergent
The rinse aid is released during the final rinse to prevent water from forming droplets on
your dishes, which can leave spots and streaks. It also improves drying by allowing water
to roll off the dishes.
WARNING! Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser
with any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would
damage the appliance.
The chemical ingredients that compose the detergent are necessary to remove, crush
and dispense all dirt out of the dishwasher.
WARNINGS!
Proper use of detergent
Use only detergent specifically made for dishwasher use. Keep your detergent fresh
and dry.
Do not put powdered detergent into the dispenser until you are ready to wash dishes.
Dishwasher detergent is corrosive! Keep it out of the reach of children.
Filling the rinse aid dispenser
1.
Remove the rinse aid dispenser cap by lifting up the tab.
2.
Pour the rinse aid into the dispenser, being careful not to overfill.
3.
Close the cap.
Adjusting the rinse aid dispenser
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps:
1.
Power on the dishwasher.
2.
Within 60 seconds after powering on the dishwasher, press and hold
about 5 seconds and then press
The display will show d3.
3.
Repeatedly press
4.
The setting will be confirmed if there is no operation in about 5 seconds.
to enter the setting mode.
to select the proper setting.
for
15
Publicité
