Publicité
Les langues disponibles
Les langues disponibles
Control panel
Brief introduction
Starting up and temperature regulation
• Insert the plug of the connection lead into the
plug socket with a protective grounding
contact.
• The temperature selector knob is located on
back
the
of the refrigerator .
Setting "1" means:
Highest temperature, warmest setting.
Setting "5" means:
Lowest temperature, coldest setting.
Important!
• Normally we advise you select a setting of 2
3
or
, if you want the temperature warmer or
colder please turn the knob to lower or higher
Using your appliance
Brief introduction
Accessories
Movable shelves/trays
• Various glass or plastic storage shelves or wire
trays are included with your appliance different
models have different combinations and different
models have different quality.
setting accordingly. When you turn the knob to a
lower setting, this can lead to more energy saving.
Otherwise, it would result high consumption of
energy.
NOTE: High temperature setting will accelerate
food waste.
• For optimum food preservation, a medium
setting is generally the most suitable.
Important!
High ambient temperatures (e.g. on
hot summer days) and a cold setting (position
4
5
to
) may cause the compressor to run
continuously or even non-stop.
Reason:
when the ambient temperature is high,
the compressor must run continuously to maintain
the low temperature in the appliance.
To avoid contamination of food, please
respect the following instructions:
• Opening the door for long periods can cause
a significant increase of temperature in the
compartments of the appliance.
• Clean regularly surfaces that can come in
contact with food.
• Store raw meat and fish in suitable containers
in the refrigerator, so that it is not in contact with
or drip onto other food.
• Two-star frozen-food compartments are
suitable for storing pre-frozen food, storing or
making ice cream and making ice cubes.
• One-, two- and three-star compartments are
not suitable for the freezing of fresh food.
• If the refrigerating appliance is left empty for
long periods, switch off, defrost, clean, dry, and
leave the door open to prevent mold developing
within the appliance.
Compliance is checked by inspection.
14
Publicité
