the place you bought it. In this case retain packing.
It is advisable to wait at least four hours before
•
connecting the appliance to allow the oil to flow back
in the compressor.
Adequate air circulation should be around the
•
appliance, lacking this leads to overheating. To
achieve sufficient ventilation, follow the instructions
relevant to installation. Wherever possible the back of
the product should not be too close to a wall to avoid
touching or catching warm parts (compressor,
condenser) to prevent the risk of a fire, follow the
instructions relevant to installation.
The appliance must not be locate close to radiators
•
or cookers.
Make sure that the mains plug is accessible after
•
the installation of the appliance
Service
Any electrical work required to do the servicing of
•
the appliance should be carried out by qualified
electrician or competent person.
This product must be serviced by an authorized
•
Service Center, and only genuine spare parts must be
used.
1. If the appliance is Frost Free.
2. If the appliance contains freezer compartment.
10