Timer; Falling Asleep To Music; Waking Up To Music; Sleep Timer - Sony GENEZI MHC-GNX660 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Timer

Falling asleep to music

— Sleep Timer

You can set the system to turn off at a preset
time, so that you can fall asleep to music.
Use buttons on the remote for the operation.
Press SLEEP repeatedly.
Each time you press the button, the minute
display changes cyclically as follows:
AUTO* t 90MIN t 80MIN t 70MIN
t ... t 10MIN t OFF
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing.
Other operations
To
Do this
Check the
Press SLEEP once.
remaining time**
Change the time
Press SLEEP repeatedly to select
to turn off
the time you want.
Cancel the Sleep
Press SLEEP repeatedly until
Timer
"SLEEP OFF" appears in the
display.
** You cannot check the remaining time if you select
"AUTO".
Notes
• During CD Synchro Recording, do not set the Sleep
Timer to "AUTO".
• When the Sleep Timer is activated, "SLEEP" lights
up in the display.
Tip
You can use the Sleep Timer, even if you have not set
the clock.

Waking up to music

— Play Timer

You can wake up to music at a preset time. Make
sure you have set the clock (see "Setting the
clock" on page 9).
Use buttons on the remote for the operation.
1
Prepare the music source you want to
play back.
• Disc: Load a disc. To start from a specific
track, make a program (see "Creating
your own program" on page 12).
• Tape: Load a tape with the side you want
to play back facing forward.
• Radio: Tune in the preset station you
want (see "Listening to the radio" on
page 14).
2
Press VOLUME +/– to adjust the
volume.
3
Press CLOCK/TIMER SET.
"SET" appears in the display, then "PLAY
SET" flashes in the display.
4
Press ENTER.
"ON" appears and the hour indication
flashes in the display.
5
Set the time to start playback.
Press –. or >+ repeatedly to set the
hour, then press ENTER.
The minute indication flashes in the
display.
Press –. or >+ repeatedly to set the
minute, then press ENTER.
6
Set the time to stop playback following
the same procedure as step 5.
7
.
>
Press –
or
the music source you want appears in
the display.
Each time you press the button, the display
changes cyclically as follows:
TUNER y CD PLAY y TAPE PLAY
+ repeatedly until
continued
21
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Genezi mhc-gnx600

Table des Matières