BALDR B0360WST2H2PR-V1 Mode D'emploi page 20

All manuals and user guides at all-guides.com
2. Press "SET ''button to select the order, press "▲/CH" or " ▼/RCC"
button to adjust the value.
3. Press and hold "
clear the calibration values.
Problem
Outdoor reading is
flashing or showing
dashes
No outdoor sensor
reception
" button before powering the weather station to
TROUBLE SHOOTING
Possible Solution
Flashing of the outdoor reading is generally an
indication of wireless interference.
1. Bring both the sensor and display indoors,
side by side and remove batteries from
each.
2. Make sure the 1-2-3 switch on both units
match.
3. Reload batteries in main unit.
4. Reload batteries in outdoor sensor.
5. Let both units sit within a couple feet of each
other for a few minutes to gain a strong
connection before taking sensor to outdoor
area.
• Reload the batteries of both outdoor sensor
and main unit. Please refer to the SENSOR
SETUP section.
• Relocate the main unit and/or the outdoor
sensor. The units must be within 328 ft (100
m) of each other.
• Make sure both units are placed at least 3
20