BALDR B0360WST2H2PR-V1 Mode D'emploi page 12

All manuals and user guides at all-guides.com
3. On normal time mode, Long press "▼/RCC'' button to enter DCF
/WWVB/MSF signal receiving.
4. During DCF reception, press "▼/RCC'' button to exit RCC
receiving.
5. The time will be converted to the current time of corresponding
time zone after receiving the RCC .(Except 0 time zone)
Remark: It will exit RCC receiving automatically when the alarm is
activated during DCF/WWVB/MSF reception , you can repeat step
3 to enter into DCF/WWVB/MSF signal receiving after turning off
the alarm.
RCC symbol display:
a. When receiving signal , RCC icon"
b. When signal successfully received, LCD will display complete RCC
icon" ''and exit RCC receiving.
c. If no signal is received, the RCC icon will disappear.
MANUAL SETTINGS
1. After signal received, if there is no need for other settings, you
can just finish reading here. If there is other setting requirements.
Please check the following steps. Or if there is no signal received,
you can follow bellow steps for manual setting.
2. Press and hold "SET" button to enter into setting, press "SET"
button to skip setting steps or go to the next setting option, the
setting data will be flashing in 1Hz.
3. Press "SET" to select Weekday Language. Press the"▲/ CH" or
"▼/RCC" button to select languages: GER(German),ENG(English),
ITA(Italian),FRE(French),DUT(Dutch),SPA(Spanish),DRN(Denmark),
Default setting :GER(DCF),ENG(WWVB/MSF)
''will be flashing by"1HZ"
12