Publicité
Recommended Installation Method
♦ T he monitor must be installed and fixed by professionals.
♦ To prevent the damage of the monitor, please firmly installed the LCD monitor on the
ground or on the fixed bracket according to the instruction.
♦ Kindly reminder: because the machine is used outdoors, it is recommended to use
stainless steel screws du ring maintenance and installation to prevent the risk of rusting
the screws.
Correct use
1 When the base need to be installed, it is necessary to use the bottom bearing with a load of
500KG to elevate the whole machine to a position 5CM from the ground, as shown in the figure
above;
2 Jhe machine need to be held in the front and behind, ma king sure that the machine is stable,
confirm the screw hole position of the bottom bracket at a distance of 5CM from the bottom of the
machine, and then fix the screw. lt is forbidden to not check the hole position, and blindly or even
violently install the screws, which will directly cause damage to the machine.
Wrong Usage
When installing the base, it is forbidden to directly lift the base after laying the machine down on
the ground. lt will cause damage to the inside of the machine and deformation damage to the
inclined end of the machine because it destroys the balance of the machine structure.
� Precautions
9
Publicité
