Publicité
Recommended Installation Method
Tip: Two hoists are required for installation.
Ground
�lfu2m2mm2moaJJ,,,2mmm2mm2lJ:,n
2. Open the package and take out the pearl
1. The complete packaging of the machine.
cotton and accessories.
3. Take out the lifting rings from the
4. Move the machine (as shown), remove the
accessories box and install them on bath
bottom lifting eye, and install the base plate.
sides of the machine, then two cranes lift
the two ends respectively.
Base installation method
Align the bottom plate A with the screw hales at the bottom of the machine, and tighten the screws.
Bottom plate A
Bottom plate B
=lll{(l 15pcs
lnside the red frame
are mounting screw
M8x35mm screw
(this side up)
( this side down)
7
Publicité
